Looks like you have E0 of dogbert (area 1) in the same ethernet broadcast
domain as E3
of aspen (Area 0).
The only reason you are not seeing a similar message in dogbert is cause
your console
logging level is differnet in dogbert....
DaveC
Shahid Muhammad Shafi wrote:
> Hi Guys.
> I am configuring a virtual link between two OSPF
> routers but it is not working at all. I am sending u
> the configuration and diagram here;. Any help and
> pinters will be appreciated.
>
> Regards
> Shahid
>
> =====
> Shahid Muhammad Shafi
> MSc Telecommunications Candidate
> University of Colorado Boulder
> BSEE(GIKI),MCSE+I,CNA,CCNA,CCNP
>
> Please help feed hungry people worldwide http://www.hungersite.com/
> A small thing each of us can do to help others less fortunate than
ourselves
>
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
> Current configuration:
> !
> version 10.2
> service tcp-small-servers
> !
> hostname catbert
> !
> enable password lab
> !
> !
> interface Ethernet0
> ip address 192.168.3.126 255.255.255.224
> !
> interface Ethernet1
> ip address 192.168.3.62 255.255.255.224
> !
> interface Ethernet2
> no ip address
> shutdown
> !
> interface Ethernet3
> ip address 192.168.21.120 255.255.255.0
> !
> interface Ethernet4
> no ip address
> shutdown
> !
> interface Ethernet5
> no ip address
> shutdown
> !
> interface Ethernet6
> no ip address
> shutdown
> !
> interface Ethernet7
> no ip address
> shutdown
> !
> interface Ethernet8
> no ip address
> shutdown
> !
> interface Ethernet9
> ip address 192.168.90.1 255.255.255.0
> shutdown
> !
> interface Ethernet10
> ip address 192.168.100.1 255.255.255.0
> !
> interface Ethernet11
> ip address 192.168.80.1 255.255.255.0
> !
> interface Fddi0
> no ip address
> no keepalive
> shutdown
> !
> interface Hssi0
> no ip address
> shutdown
> !
> router ospf 1
> network 192.168.3.32 0.0.0.31 area 2
> network 192.168.3.96 0.0.0.31 area 2
> !
> no logging console
> !
> !
> line con 0
> exec-timeout 0 0
> password lab
> login
> line aux 0
> password lab
> login
> transport input all
> line vty 0 4
> password lab
> login
> !
> end
>
> Current configuration:
> !
> version 10.2
> !
> hostname breckenridge
> !
> enable password lab
> !
> !
> interface Ethernet0
> ip address 192.168.3.97 255.255.255.224
> !
> interface Ethernet1
> ip address 192.168.3.94 255.255.255.224
> !
> router ospf 1
> network 192.168.3.96 0.0.0.31 area 2
> network 192.168.3.64 0.0.0.31 area 2
> !
>
> Current configuration:
> !
> version 11.0
> service udp-small-servers
> service tcp-small-servers
> !
> hostname aspen
> !
> enable password lab
> !
> !
> interface Loopback0
> ip address 2.2.2.2 255.255.255.0
> !
> interface Ethernet0
> no ip address
> shutdown
> !
> interface Ethernet1
> ip address 192.168.3.33 255.255.255.224
> !
> interface Ethernet2
> --More--
> %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID, from backbone
> area mu
> st be virtual-link but not found from 192.168.2.254, Ethernet3
>
> shutdown
> !
> interface Ethernet3
> ip address 192.168.1.1 255.255.255.0
> !
> interface Ethernet4
> no ip address
> shutdown
> !
> interface Ethernet5
> ip address 192.168.3.65 255.255.255.224
> !
> interface Ethernet6
> no ip address
> shutdown
> !
> interface Ethernet7
> no ip address
> shutdown
> !
> interface Fddi0
> no ip address
> --More--
>
> router ospf 1
> network 192.168.3.32 0.0.0.31 area 2
> network 192.168.3.64 0.0.0.31 area 2
> network 192.168.1.0 0.0.0.255 area 1
> area 2 range 192.168.3.0 255.255.255.0
> area 1 virtual-link 1.1.1.1
> !
> logging console notifications
> !
> !
> line con 0
> line aux 0
> transport input all
> line vty 0 4
> login
> !
> end
>
> enable password lab
> !
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.0
> !
> interface Ethernet0
> ip address 192.168.1.254 255.255.255.0
> no keepalive
> !
> interface Ethernet1
> ip address 192.168.2.1 255.255.255.0
> !
> interface Ethernet2
> --More--
>
> router ospf 1
> network 192.168.2.0 0.0.0.255 area 0
> network 192.168.1.0 0.0.0.255 area 1
> area 1 virtual-link 2.2.2.2
>
> Current configuration:
> !
> version 10.2
> service tcp-small-servers
> !
> hostname dogbert
> !
> enable password lab
> !
> !
> interface Loopback0
> ip address 3.3.3.3 255.255.255.0
> !
> interface Ethernet0
> ip address 192.168.2.254 255.255.255.0
> !
> interface Ethernet1
> no ip address
> shutdown
> !
> interface Fddi0
> no ip address
> no keepalive
> shutdown
> !
> interface Hssi0
> no ip address
> shutdown
> !
> interface Serial0
> no ip address
> shutdown
> !
> interface Serial1
> no ip address
> shutdown
> !
> router ospf 1
> network 192.168.2.0 0.0.0.255 area 0
> !
> !
> !
> line con 0
> line aux 0
> transport input all
> --More--
>
> [GroupStudy.com removed an attachment of type application/x-mspowerpoint
> which had a name of logical_diag_v3.ppt]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=683&t=674
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
