Hi.. group
May I ask if a serial link is said to be 256K, does it mean that the both
input and output rate cannot exceed 256K or the SUM of input rate and output
rate cannot exceed 256K.
What is the Duplex type of Serial link as shown below?
Why some of the serial link traffic rate are based on 5 minute in/output
rate, but some of them are based on 10 minute in/output rate. How to
change it? Does it shown the same info? How they count? They determined
the number of bits in 5 minute and divided by the number of second in 5
minute 5X60s??
SIN01>sh int s2/0
Serial2/0 is up, line protocol is up
Hardware is M4T
Description: --- Connects to LON01 S2/0 - MCI Circuit ID W0B73202 ---
Internet address is 57.192.240.70/30
MTU 1500 bytes, BW 256 Kbit, DLY 20000 usec,
reliability 255/255, txload 77/255, rxload 49/255
Encapsulation HDLC, crc 16, loopback not set
Keepalive set (10 sec)
Last input 00:00:01, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output drops: 14248
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/20/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 50000 bits/sec, 28 packets/sec
5 minute output rate 78000 bits/sec, 32 packets/sec
101610672 packets input, 3280206236 bytes, 0 no buffer
Received 872308 broadcasts, 1 runts, 35 giants, 0 throttles
5313 input errors, 4073 CRC, 0 frame, 7 overrun, 0 ignored, 1233 abort
115170761 packets output, 3847528448 bytes, 0 underruns
0 output errors, 0 collisions, 547 interface resets
0 output buffer failures, 0 output buffers swapped out
554 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=864&t=864
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
