Is there any "rule of thumb" when it comes to determining which trunking
mode to use. I'm in an environment where about a dozen trunks exist between
4 6509's. The trunking modes have been set using "on", "desirable" and
"auto". Is there any need to have them uniform in appearance? For example,
one side of the link "desirable", the other side "auto".
>From what I'm reading, I'm thinking since these 6509's are in the core of
our network, the setting should be to "on" throughout. Any suggestions? TIA!
Robert
Robert M. Lopez
Network Planning
Ann Arbor Data Center
Pfizer Global Research & Development
Phone 734-622-3948 Fax 734-622-1690
"There are only two ways to live your life. One is as though nothing is
a miracle. The other is as though everything is a miracle." ...Albert
Einstein
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=902&t=902
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
