Sounds like you are implementing too many thing at once.
1. Before you implement HSRP on the interface you should
verify simple
connectivity. Get rid of the everything on the RTR-B
interface and see
if it is up & up. If not than you should look for a simpler
problem
than HSRP not working correctly.
2. Since it is up & down (ethernet) my guess is that you
have a physical
layer issue. Possibly a cable issue, or the other end of
the fa int is
plugged into a 10 Mb hub/switch?
PS: when you do get it into up/up;
since RTR-B's priority is 150 won't it be the active
interface?
(assuming that STANDBY PREEMPT is used)
Let us know what you find....
DaveC
SH Wesson wrote:
>
> There are two routers: Rtr-A and Rtr-B. HSRP is running between these
> two groups with RTR-A set with a priority of 100 and RTR-B set with a
> priority of 150. Currently, RTR-A is the active router. However RTR-B
> shows that it's in a state of INIT. When I do a "show int fa0/0", it
> shows that the line is up but the protocol is down. The configuration
> looks fine and HSRP is tracking the serial interface.
>
> Any suggestion as to why RTR-B is not in standby state and how to resolve
> the
> problem to get it out of INIT state. If RTR-A goes down now, RTR-B will
> not pick up and become active as it stands now. Any assistance would be
> appreciated.
>
> Thanks.
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=908&t=903
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
