Best to modify the interface bandwidth parameter. Don't think you want to be
messing with the EIGRP default metrics.
Btw, to quote a sage, what problem are you trying to solve?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Dove
Sent: Tuesday, April 17, 2001 9:21 PM
To: [EMAIL PROTECTED]
Subject: Change EIGRP routing path [7:1048]
Hi all,
My network is running EIGRP routing protocol. I want to force the routing
path so that the routing will not go through the shortest path (e.g. force
the route from "R1" to "R3" which must go through "R2" and "R4"). What is
the proper way to do so? Should I change the parameter "BANDWIDTH", "DELAY"
or others?
R1 ----10---- R2
| |
| |
10 10
| |
R3 ----10---- R4
Thanks.
dovelet
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1050&t=1048
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
