Either TACACS+ or RADIUS will do the trick. If you are NOT familiar with
Unix, tough luck.
Sean
>From: "SH Wesson"
>Reply-To: "SH Wesson"
>To: [EMAIL PROTECTED]
>Subject: telnet [7:1212]
>Date: Thu, 19 Apr 2001 09:18:49 -0400
>
>I want to allow this one network to be able to to telnet into my router,
>but
>when then telnet into it I only want to give them access to the "show
>interface" command and nothing else. However when I telnet into it from my
>network I want to be able to access everything.
>
>What I've done is set the password on vty 0 4 and use the command login.
>However when they telnet to it and type the password to login then can
>access a lot of other commands including "show version", "show logging",
>"show standby", a lot of others even though they can't get into config t
>mode.
>
>Can anyone show me how to configure it to restrict the above telnet to only
>a few commands. Thanks.
>
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1218&t=1212
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
