You will have to use the 'variance' command to support
load-balancing in case of EIGRP
Muhammad Khalilullah
CCNP, MCSE
--- Paul L Holloway
wrote:
> I have a customer wanting his ISDN line(BRI)to take
> up the slack when the
> utilization on his T1 gets to high. He has a 3640
> router. I know the load
> balancing considerations for routing protocols and
> am suggesting he run
> EIGRP as his IGP since OSPF won't load balance
> across two "unequal" paths.
> The config. on his serial I believe would be:
>
> int S1/0
> ip address x.x.x.x x.x.x.x
> no ip redirects
> no ip directed-broadcast
> no ip proxy-arp
> encapsulation ppp
> no ip route-cache distributed
> no fair-queue
> no cdp enable
> backup delay 30 60
> backup int BRI1/0
> backup load 70 40
>
> Are there any other snags or problems I may run into
> with this setup?
> Thanks in advance.
>
> --
> Paul Holloway CCNA, CCDA
> Systems Engineer
> Arrival Technologies
> Tel: 228-314-1100 ex.304
>
> --
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1298&t=1280
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
