generally speaking, 1 switch is 1 diamter....
""Sim, CT (Chee Tong)"" Hi.. I read CISCO BCMSN book.. it said that
modifying the spanning tree
dia
> (network diameter) will correcly modify the timer (eg Max age, hello,
> forward delay). But I don't understand how "dia" can modify it? Based on
> what conditions?
>
> From the show spantree output as shown below from 2900..and based on their
> hello and max age how do I know its "dia"? What is the defination of dia?
> If I have a network, how to determine the "dia" I should set for the dia??
>
> Cat29-L8-2>sh spantree
>
> Spanning tree 1 is executing the IEEE compatible Spanning Tree protocol
> Bridge Identifier has priority 32768, address 00d0.58b0.6280
> Configured hello time 2, max age 20, forward delay 15
> Current root has priority 8192, address 00d0.063e.0c00
> Root port is 13, cost of root path is 19
> Topology change flag not set, detected flag not set, changes 3579
> Times: hold 1, topology change 35, notification 1
> hello 1, max age 6, forward delay 4
> Timers: hello 0, topology change 0, notification 0
>
>
> 2)How to show the "last topology change" info in 2900 and 5500? The show
> spantree output above didnot show that info.
>
>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1345&t=1331
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
