hi friends
2 of my sites got connected through aux ports of 2- cisco 2610 routers. speed
is very poor. end users are very much frustrated to work.
before that both sites were connected through Windows-NT RAS servers with
D-link modems. no problem at all that time.
can u pls suggest few commands which will improve the speed between 2 sites
through aux ports of my 2610 routers.
i am attaching IOS configuration
interface Async65
ip address XXX 255.255.255.0
encapsulation ppp
dialer in-band
dialer rotary-group 1
async mode dedicated
interface Dialer1
ip address XXX 255.255.255.0
encapsulation ppp
dialer in-band
dialer idle-timeout 600
dialer map ip XXX name XXX broadcast 111111
dialer hold-queue 20 timeout 10
dialer-group 1
ppp callback request
ppp authentication pap
ppp pap sent-username YYY password YYY
line aux 0
modem InOut
modem autoconfigure discovery
transport input all
autohangup
stopbits 1
speed 115200
flowcontrol hardware
line vty 0 4
password obt
login
ip route 192.168.1.0 255.255.255.0 192.168.89.31
ip route 192.168.89.31 255.255.255.255 Dialer1
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1522&t=1522
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
