Hi, I am upgrading the bandwidth of my ISDN link which is used as backup.I am adding another ISDN line to have a bandwith of 256kbps ( 2 lines ) I am currently using ddr with floating static routes and the remote router dials at our end when the primary link is down. I plan to use the foll config at the remote end int dialer1 encap ppp ip address ... dialer string xxxx dialer string yyyy dialer group 1 dialer load threshold 1 either ppp multilink int bri0 dialer rotary group 1 encap ppp int bri1 dialer rotary group 1 encap ppp And a similar config at the local end ( excluding dialer string commands) As soon as I try to configure the dialer load threshold 1 either command on the dialer interface, I get a message that " Configure dialer in band, dialer pool or dialer remote name first" Am I missing something in the config or do I have to add dialer in band... Need your valuble comments / remarks Amit __________________________________________________ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=1564&t=1564 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
