Michael,
Hi! I'd recommend getting a couple of 2513s in addition to the gear you
have listed. I'd also recommend a couple of 2503s or 04s and an ISDN
simulator (unless you were planning to put the BRI modules in the 4xxx
routers). The hardware you are going to purchase should really be focused
around the labs you are going to practice with (or teach). Let me know if
you need anymore info.
-Brad Ellis
CCIE#5796
[EMAIL PROTECTED]
Optimized Systems Inc
used cisco hardware: www.optsys.net
""Michael Bambic"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am putting together a document for my company to purchase 5 CCIE labs
and
> I need help with the VOIP equip part.
> I plan on using
> 3 2501's
> 1 25011
> 3 4000M
> 2 4500's
> 1 Catalyst 5000
> 1 Catalyst 3920 tr switch
> 1 Lightstream 100 ATM switch
>
> The 2 of the 4500's will have ATM interfaces and 1 of those 2 will have an
4
> port serial and the other a FastEthernet interface to support trunking for
> the 5000 switch which will have a Sup II module and the 12 port 10/100
> module. This leaves one open slot per 4500, could I implement voice on
these
> routers and what card would I need? Any other outside equipment required?
> What memory requirements?
> Thanks for helping my laziness as I'm tired of pouring over the CCO cd.
> :)
> Thanks!
>
> Mike Bambic
> Lead Mentor
> Phoenix Branch
> 602-955-5888
> Cisco Regional Business Development Manager
> TechSkills
> www.techskills.com
> [EMAIL PROTECTED]
>
> [GroupStudy.com removed an attachment of type application/ms-tnef which
had
> a name of winmail.dat]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1627&t=1614
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
