3104's & 3204's operate both DCE & DTE. 3102's & 3202 only operate as DTE.
Most all V2 interfaces have DCE available.
Phil
----- Original Message -----
From: Kevin Wigle
To:
Sent: Monday, April 23, 2001 7:40 PM
Subject: Re: Can a 3104 serial interface provide clocking? [7:1656]
> nope you're right! :-)
>
> 3000's can't do the DCE thing. Got one here hooked up to a 4000. Same
prob
> but of course for me it's ok as the 4000 does dce.
>
> Guess you need a 3rd router in the middle!
>
> any excuse to buy another router is good for me. (unless one of the gurus
> here can concoct a special cable for you???)
>
> Kevin Wigle
>
> ----- Original Message -----
> From: "Nathan Cruz"
> To:
> Sent: Monday, 23 April, 2001 19:19
> Subject: Can a 3104 serial interface provide clocking? [7:1656]
>
>
> > I am trying to hook up two 3104's back to back but when I try to put in
> clock
> > 64000 I get the error msg. "Not allowed on DTE interface". When in fact
> the
> > sh
> > controller command shows that it is a dce cable attached. Any help would
> be
> > appreciated. Thanks.
> >
> > Nathan
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1671&t=1656
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
