Now i have a pri in my network,but it doesnot work. Please help me. Thanks.
The following message is:
show isdn status
Global ISDN Switchtype = primary-net5
ISDN Serial0/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
The Free Channel Mask: 0xFFFF7FFF
Total Allocated ISDN CCBs = 0
Debug isdn q921
3d17h: ISDN Se0/0:15: TX -> SABMEp sapi = 0 tei = 127
3d17h: ISDN Se0/0:15: RX SABMEp sapi = 0 tei = 0
3d17h: ISDN Se0/0:15: RX SABMEp sapi = 0 tei = 0
3d17h: ISDN Se0/0:15: RX SABMEp sapi = 0 tei = 0
3d17h: ISDN Se0/0:15: RX <- UAf sapi = 0 tei = 0
3d17h: %ISDN-6-LAYER2DOWN: Layer 2 for Interface Se0/0:15, TEI 0 changed to
down
3d17h: ISDN Se0/0:15: Event: received NL_REL_IND
3d17h: ISDN Se0/0:15: RX <- RRp sapi = 0 tei = 0 nr = 0
3d17h: ISDN Se0/0:15: RX <- RRp sapi = 0 tei = 0 nr = 0
3d17h: ISDN Se0/0:15: RX <- RRp sapi = 0 tei = 0 nr = 0
3d17h: ISDN Se0/0:15: RX <- RRp sapi = 0 tei = 0 nr = 0
3d17h: ISDN Se0/0:15: RX <- SABMEp sapi = 0 tei = 0
3d17h: ISDN Se0/0:15: RX <- SABMEp sapi = 0 tei = 0
3d17h: ISDN Se0/0:15: RX <- SABMEp sapi = 0 tei = 0
3d17h: ISDN Se0/0:15: RX <- SABMEp sapi = 0 tei = 0
3d17h: ISDN Se0/0:15: RX <- SABMEp sapi = 0 tei = 0
3d17h: ISDN Se0/0:15: RX <- SABMEp sapi = 0 tei = 0
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1673&t=1673
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
