1) Even you boot from the TFTP, you still need enough memory to run IOS?
2) Did you change the register value? Register value should be 0x102, if
I am correct
Hope this help
Vincent
""Maximus Decimus"" Hi all,
>
> Need assistance in getting the above working. I have a 2651 with 2 x
10/100
> interfaces and am trying to get 802.1Q VLAN trunking to work on 1 of the
> interfaces.
>
> Figured that I need IOS 12.1(7) with IP Plus features. Tried running IOS
> from TFTP as I don't have enough flash at the moment, but it did not work.
> Observed a boot loader error. Any suggestions?
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1720&t=1716
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
