Check your Sho Version. If your config-register is not in 0x2102, then you
never will see those configs.
It's where I would start
Phil
----- Original Message -----
From: Chan
To:
Sent: Wednesday, April 25, 2001 11:24 AM
Subject: RE:Can't copy run to start [7:1880]
> Hi All
>
> After i have copy my running config to start using "copy run start" then
> reload my router,but when i do a sh run or sh start the config is
> gone.Can anyone advise on this.
>
> Thank you
>
> Regards
> Chan
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1888&t=1880
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
