I have this in placing and running, you can find a sample configuration at
http://www.cisco.com/warp/public/110/39.html. You need to put your subnets
that you want to route to in the access lists and also assign static routes
on both sides.
""David Johnstad"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hello All,
>
> Has anyone configured a PIX 525 that will enable a router-to-router
> IPSEC tunnel with NAT 0 (zero) through it? I've checked CCO, PIX
> documentation and got very little info on exactly how to accomplish this
> task. I thought I'd ask this study group with its diversity of
> experience and knowledge. Any advise would be greatly appreciated.
> Thanks.
>
> David Johnstad
> Senior Network Engineer
> Interelate, Inc.
> [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2014&t=1859
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
