So in this case, the Port-Channel still holds the redundant property of EtherChannel? If one FastEthernet interface went down, the other still handles the trunking and sub-interfaces...? Thanks alot!!! ""Coleman, Jason"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > When you setup the EtherChannel you will then be using the Port-Channel > interface and not the FE interface. > You can then setup your 802.1q or ISL trunking encapsulation and your > sub-interfaces on the Port-Channel. > > The physical FE interfaces will not have an IP address or sub-interfaces > assigned to them. > > Jason Coleman - CCNP, CCDP > Customer Engineer > Network Management Center - Austin > (ph) 512-340-3134 > (email) [EMAIL PROTECTED] > > > -----Original Message----- > From: Thomas [mailto:[EMAIL PROTECTED]] > Sent: Thursday, April 26, 2001 2:40 AM > To: [EMAIL PROTECTED] > Subject: Re: Etherchannel between 2621 router and > 3548 switch [7:2049] > > I succeeded configuring the trunking using dot1q > encapsulation. However, I > wonder if I can apply "EtherChannel" to the trunk for > variable speed and > redundancy. If I have 2 FastEthernet ports configured to be > the > EtherChannel, will the subinterfaces I created on one > FastEthernet port will > replicate on the other one of the 2621? Because I know I > cannot have the > same IP address on diferent interfaces of a router. > > > > ""EA Louie"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > this should work just perfect for you > > > > http://www.cisco.com/warp/public/473/50.shtml > > > > ----- Original Message ----- > > From: Thomas > > To: > > Sent: Wednesday, April 25, 2001 10:28 PM > > Subject: Etherchannel between 2621 router and 3548 switch > [7:2049] > > > > > > > Hi All - I wonder if it is possible to configure the 2 > Fast Ethernet > ports > > > on the 2621 router to be the EtherChannel of trunk? If > so, how can I > > create > > > sub-interfaces for Multi-vlans? any document I can find? > Thanks All! > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=2182&t=2049 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
