Frame over serial? (T1/Ds1/Ds3) They would have to plug into a Network
analyzer with a compatible interface, not a hub. Most hardware network
analyzers have pass-through connections that let you plug through the
analyzer to the router.
Good Luck,
Ejay
-----Original Message-----
From: Rizzo Damian [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 10:10 AM
To: [EMAIL PROTECTED]
Subject: Sniffer on a Frame line... [7:2253]
Quick question for you all. If you were to break a Frame Relay
connection going into a router by first plugging it into a hub, then
connecting it to the router, for the purposes of plugging a sniffer into
that hub to monitor all frame traffic, would this scenario work or not so
much? Thanks for your input!
-Rizzo
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2260&t=2253
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
