More info on this: When we by pass PIX (plus in a laptop to a hub between PIX and Internet router). We CAN browse www.sitemeter.com. Behind PIX, we can ping www.sitemeter.com and get 100% reply from 216.167.17.2. But we CANNOT browse using IE. Route is going to the correct gateway, do not have 216.167.17 in our WAN. So HTTP/application layer coming from the site is definately blocked in the PIX. Any ideas? Thanks! Ken Yeo Network Engineer Aurum Technology CCNP, CCDA, MCSE, CNE ""Ken Yeo"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > We are having problem to browse this website: > > www.sitemeter.com > > Internet explorer will say "Opening page http://www.sitemeter.com"; in the > status bar on the bottom and the page never came up. It came back with > error: > > The page cannot be displayed > We are able to browse the site using dialup to Netzero and some other dial > up ISP. > I wonder those of you who use PIX try this site? > Our first thought was reserve DNS was not setup so we setup reserve DNS for > the NATed IP on the PIX, but still cannot browse the site. Any ideas? > Thanks, > Ken Yeo > Network Engineer, > Aurum Technology > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=2305&t=2305 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
