Raul,
Please explain what you mean by "1 Ethernet interface".All cable/DSL modems
I have workd with(It has been a lot) have a Ethernet handoff. You need 2
Ethernet interfaces to connect a cable modem to a router and then to your
LAN. Also, I have not been able to get an IOS version for the Cisco 4000
that does IP Address DHCP as needed to be a dhcp client. I am currently
doing it with a Cisco 2514.
Rick
""Raul F. Fernandez"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Or run nat overload off the 1 ethernet interface on the router, thats how
I
> do it.
>
> Raul
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Kevin Wigle
> Sent: Friday, April 27, 2001 4:16 PM
> To: [EMAIL PROTECTED]
> Subject: Re: 2511 between cable modem and network [7:2312]
>
>
> quick answer - no
>
> The connection to the cable modem is ethernet. Don't get confused by the
> term "modem".
>
> You need a router with 2 ethernet ports.
>
> Kevin Wigle
>
> ----- Original Message -----
> From: Roberts, Timothy
> To:
> Sent: Friday, April 27, 2001 3:52 PM
> Subject: 2511 between cable modem and network [7:2312]
>
>
> > Can a 2511 be setup to connect a cable modem (ethernet) to a network
> segment
> > (ethernet)? I was going to use a 4000 but I do not have the flash
> > requirements to run 12.1 code so that I can make use of the "ip address
> > dhcp". Can I use one of the Async ports to connect to the cable modem
end
> > (provider via dhcp) and then enable nat to my network via the e0. Is
this
> > possible? Has anyone tried this before?
> > Thanks
> >
> > Confidentiality Notice: This e-mail message, including any attachments,
is
> > for the sole use of the intended recipient(s) and may contain
confidential
> > and privileged information. Any unauthorized review, use, disclosure or
> > distribution is prohibited. If you are not the intended recipient,
please
> > contact the sender by reply e-mail and destroy all copies of the
original
> > message.
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2342&t=2312
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
