Can anybody post some working configs for a 2509 or 2511. I am going nuts
trying to configure a 2509 i just got. I have been using this page as a
reference but i am not having much luck.
http://www.cisco.com/warp/customer/793/access_dial/comm_server.html. I cant
seem to find any other info on the cisco site relating to just setting this
thing up plugged into the console ports of my other routers. Currentl;y i
have it working on one router (the 1601) but i cant get a second one to work
(2521). I cant tell what the difference is at this point. I will post my
running configs if anybody can offer some tips. The configs are a bit messy
on some of them as these are lab routers and i am studying for my BSCN exam.
I posted this to the other 2 cisco newsgroups yesterday but i think my news
server sucks. I still dont see my posts 15 hours later.... Also, the 1601
router when i try to connect gives the message connection refused by remote
host but if i hit enter again it connects. The 2521 just gives me the same
message but wont connect at all. I would really appreciate any help. I just
cant find any info that is useful anywhere. I even drove to the bookstore
and looked through about 15 books but didnt find anything more specific then
the page i refrenced above.
2509#show run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service tcp-small-servers
!
hostname 2509
!
enable secret 5 $1$CGrA$aulSLMoAI69oIp45K6r9c1
!
ip subnet-zero
ip host 1601-1 2001 192.168.255.2
ip host 2521-1 2002 192.168.255.2
!
!
!
interface Loopback1
ip address 1.1.1.1 255.0.0.0
no ip directed-broadcast
!
interface Ethernet0
ip address 192.168.255.2 255.255.255.0
no ip directed-broadcast
!
interface Serial0
no ip address
no ip directed-broadcast
shutdown
!
interface Serial1
no ip address
no ip directed-broadcast
shutdown
!
ip classless
!
!
line con 0
exec-timeout 0 0
logging synchronous
line 1 8
transport input all
line aux 0
transport input all
line vty 0 4
password zzixx
login
!
end
1601-1#show run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 1601-1
!
enable secret 5 $1$yP.A$VB22oPJAoWuaYRZ5o3.0p1
!
ip subnet-zero
!
!
!
interface Loopback100
ip address 172.16.10.100 255.255.255.0
no ip directed-broadcast
!
interface Loopback101
ip address 172.16.11.100 255.255.255.0
no ip directed-broadcast
!
interface Ethernet0
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0
ip address 10.1.1.100 255.255.255.0
no ip directed-broadcast
!
router eigrp 200
redistribute eigrp 100
network 10.0.0.0
!
router eigrp 100
network 172.16.0.0
!
router ospf 200
network 10.0.0.0 0.255.255.255 area 0
network 172.16.0.0 0.0.255.255 area 0
!
ip classless
!
!
line con 0
exec-timeout 0 0
logging synchronous
line vty 0 4
password zzixx
login
!
end
2521-1#show run
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname 2521-1
!
enable secret 5 $1$eU1p$E/kXa46E7Hqm4EHzS2r5u/
!
ip subnet-zero
no ip domain-lookup
frame-relay switching
!
!
!
interface Serial0
bandwidth 64
ip address 192.168.1.17 255.255.255.240
no ip directed-broadcast
encapsulation frame-relay
no ip mroute-cache
clockrate 64000
frame-relay intf-type dce
frame-relay route 203 interface Serial2 302
!
interface Serial1
bandwidth 64
ip address 192.168.1.33 255.255.255.240
no ip directed-broadcast
shutdown
clockrate 64000
!
interface Serial2
bandwidth 64
ip address 192.168.1.49 255.255.255.240
no ip directed-broadcast
encapsulation frame-relay
clockrate 64000
frame-relay intf-type dce
frame-relay route 302 interface Serial0 203
!
interface Serial3
bandwidth 64
ip address 10.1.1.1 255.255.255.0
no ip directed-broadcast
shutdown
clockrate 64000
!
interface TokenRing0
no ip address
no ip directed-broadcast
shutdown
!
interface BRI0
no ip address
no ip directed-broadcast
shutdown
!
ip classless
!
!
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
password zzixx
login
--More--
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2376&t=2376
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
