sorry - "ip load-sharing per-packet" is a per-interface command - my slip
A
----- Original Message -----
From: "andyh"
To: "Roberts, Timothy" ;
Sent: Tuesday, May 01, 2001 6:39 PM
Subject: Re: CEF [7:2774]
> CEF will load-balance by default across equal cost routes, on a
> per-source-destination address pair.
>
> all you need configure is "ip cef" globally on the router, and "ip
> route-cache cef" on each interface where this functionality is required.
>
> To load-balance per-packet add "ip load-sharing per-packet" globally. You
> may wish to do this if the majority of you traffic is between a single
host
> at each end of the circuits, where the default method will utilize a
single
> path, although this may mean that one circuit is used in one direction,
and
> other in the reverse direction - the routers have no way, or particular
need
> to know what path has been selected by the remote end.
>
> hth
>
> Andy
>
> ----- Original Message -----
> From: "Roberts, Timothy"
> To:
> Sent: Tuesday, May 01, 2001 6:04 PM
> Subject: CEF [7:2774]
>
>
> > Has anyone used CEF (Cisco Express Forwarding) for load balancing across
> > multiple T1s? How is the setup?
> >
> > Confidentiality Notice: This e-mail message, including any attachments,
is
> > for the sole use of the intended recipient(s) and may contain
confidential
> > and privileged information. Any unauthorized review, use, disclosure or
> > distribution is prohibited. If you are not the intended recipient,
please
> > contact the sender by reply e-mail and destroy all copies of the
original
> > message.
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=2785&t=2774
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
