hmm, seems my "left-arrow break right-arrow" didn't show up for some reason,
let's try that again:
execute a break during bootup - Alt-B or from the toolbar Control then
Send-Break under teraterm
Andy
----- Original Message -----
From: "andyh"
To:
Sent: Thursday, May 03, 2001 7:02 PM
Subject: Re: IOS upgrade via console modem/ console port... [7:3074]
> execute a during bootup
>
> ----- Original Message -----
> From:
> To:
> Sent: Thursday, May 03, 2001 6:50 PM
> Subject: IOS upgrade via console modem/ console port... [7:3074]
>
>
> > Group-
> >
> > I'm trying to upgrade the IOS on a 2500 series router via
> > the console port using a dial up modem, According to the Cisco
> > website you have to be in the rommon> mode to accomplish this using the
> > xmodem command...
> >
> > However I can't seem to get this 2501 to go into rommon, I've changed
the
> >
> >
> > config-register setting to 0x0, 0x1, & 0x3
> >
> > Theses only put me into the boot mode & the old > mode.
> >
> > Can't seem to get to the rommon 1> mode though ..
> >
> > Any ideas ??
> >
> > Thanks in advance..
> > ________________________________________________________________
> > GET INTERNET ACCESS FROM JUNO!
> > Juno offers FREE or PREMIUM Internet access for less!
> > Join Juno today! For your FREE software, visit:
> > http://dl.www.juno.com/get/tagj.
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3082&t=3074
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
