Can anyone explain this condition!!!
SBCEN5_8TH_FLOOR_PHASE1#sh int s0
Serial0 is down, line protocol is up
Hardware is HD64570
Description: MSWAP (RMSPEBD6)
MTU 1500 bytes, BW 10 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation SDLC, loopback not set
Router link station role: PRIMARY (DCE)
Router link station metrics:
slow-poll 10 seconds
T1 (reply time out) 3000 milliseconds
N1 (max frame size) 12016 bits
N2 (retry count) 20
poll-pause-timer 10 milliseconds
poll-limit-value 1
k (windowsize) 7
modulo 8
sdlc vmac: 5043.C2AD.A1--
sdlc addr C6 state is DISCONNECT
cls_state is CLS_STN_CLOSED
VS 0, VR 0, Remote VR 0, Current retransmit count 0
Hold queue: 0/200 IFRAMEs 0/0
TESTs 0/0 XIDs 0/0, DMs 0/0 FRMRs 0/0
RNRs 0/0 SNRMs 15959/0 DISC/RDs 0/0 REJs 0/0
Poll: clear, Poll count: 0, chain: C6/C6
Last input never, output 00:01:36, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
15959 packets output, 31918 bytes, 0 underruns
0 output errors, 0 collisions, 59 interface resets
0 output buffer failures, 0 output buffers swapped out
244682856 carrier transitions
DCD=up DSR=up DTR=down RTS=down CTS=up
Mike Hawthorne
Johanesburg
South Africa
______________________________________________
Disclaimer and confidentiality note
Everything in this e-mail and any attachments relating to the official
business of Standard Bank Investment Corporation (Stanbic)
is proprietary to the company. It is confidential, legally privileged and
protected by law.\
Stanbic does not own and endorse any other content. Views and opinions are
those of the sender unless clearly stated as being that of Stanbic.
The person addressed in the e-mail is the sole authorised recipient.
Please notify the sender immediately if it has unintentionally reached you
and do not read, disclose or use the content in any way.
Stanbic can not assure that the integrity of this communication has been
maintained
nor that it is free of errors, virus, interception or interference.
______________________________________________
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3146&t=3146
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
