dude, if you're sharp enough to do the conversion, then here are the pinouts http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2501/ 2500ug/pin.htm (watch URL warp) There's a link to V.35 there - remember you'll have to change the Winchester connector to female too... btw, this was the first result of a CCO search on "60 pin cable pinouts" -e- ----- Original Message ----- From: To: Sent: Sunday, May 06, 2001 7:18 PM Subject: Need pinouts to convert Cisco DTE Male cable to DCE female [7:3398] > Hi folks- > > I have an abundance of male db-60 to v.35 DTE cables & not enough of the > DCE > female cables..I'd like to know if it's possible to convert the DTE > cables to DCE > cables without too much hassle if it's too much hassle then I'll just > purchase a few more DCE's. > Pinout's ??? > > Thanks in advance. > > Randy > ________________________________________________________________ > GET INTERNET ACCESS FROM JUNO! > Juno offers FREE or PREMIUM Internet access for less! > Join Juno today! For your FREE software, visit: > http://dl.www.juno.com/get/tagj. > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=3428&t=3428 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
