That's exactly the sort of thing I'm looking for, but I've scoured CCO and
cannot find anything that says it will or won't work.
I've heard rumour that the only limiting factor was that I would not get a
non-blocking configuration, but I'll put up with that if I can get it to
work.
Anybody any clues, particularly on the error that points to ROM version,
while ROM version seems to be sufficient?
Thanks,
Gaz
""Kevin Wigle"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I would have to find it again but I'm sure that somewhere on CCO it says
> that a 3620 shouldn't have more than 2 fast interfaces be they fast
ethernet
> or ATM or a combination.
>
> Your router now has 4 fast interfaces.
>
> Kevin Wigle
>
> ----- Original Message -----
> From: "Gareth Hinton"
> To:
> Sent: Tuesday, 08 May, 2001 17:39
> Subject: 3620 with 2 x NM-2FE-2W problem [7:3687]
>
>
> > Hi all,
> >
> > Problem with a 3620:
> >
> > Takes one NM-2FE-2W fine. When second one is inserted major problems
> arise.
> >
> > NM slot 0: PCI dev 5 init failed
> > No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM
> >
> > The boot rom is "System Bootstrap, Version 11.1(20)AA2"
> >
> > I've gone through CCO to confirm that the 3620 will take these cards,
and
> > although there were a few doubts, eventually found it and they should be
> OK.
> >
> > Anybody seen similar or got ideas.
> >
> > Thanks,
> >
> > Gaz
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3715&t=3687
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
