If it was me I would try an extended ping from my router giving my LAN
address as source and also double check I have my default gateway set in my
PC.
Rashid
""John Brandis"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> G'Day all for the second time today.
> 2 questions:
>
> Question 1: I have a 4MB HDSL link coming into my 2503 serial 0 port. Can
I
> check the bandwidth to make sure that this is what I really have in terms
of
> BW.......
>
> Question 2: Have configured the router to connect to the HDSL network and
the
> ethernet network. That part is fine, I can access hosts on both networks
> (ping) from the router. However, when I go to my workstation and I
CORRECTLY
> configure the IP settings, all I can access is the router and nothing over
> the
> WAN link. I made sure that there are NO ACL's going against me and I have
the
> route static route configured correctly. What can I try now ????/
>
> thanks
> [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3965&t=3958
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
