Hi all!
I don4t find the way to see the traffic accross a subinterface. The
txload and rxload counters don4t reflect the real traffic. I4m looking
for a solution. Any clue?
Thanks.
ATM1/0.32 is up, line protocol is up
Hardware is ENHANCED ATM PA
Internet address is 192.168.99.1/30
MTU 4470 bytes, BW 256 Kbit, DLY 200 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ATM
1222546 packets input, 118118125 bytes
955145 packets output,92508004 bytes
2216563 OAM cells input, 2216563 OAM cells output
Ricardo Ciganda
CCDA, CCNP Security
Systems Engineer and Network Consultant
BYTEMASTER, S.A.
C/ Gran Capitan 2-4 4* Planta
Barcelona, SPAIN 08034
[EMAIL PROTECTED]
Phone: (+34) 93-2520540
Fax: (+34) 93-2520541
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3966&t=3966
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
