Hai,
Text displays the menu options and the line no has to match with command
line nos. Make sure that you give way out from the menu loop by using
"menu-exit" command.
menu robert text 1 config
menu robert text 2 int-e0
menu robert text 3 shut
menu robert text 4 Exit
menu robert command 1 config terminal
menu robert command 2 interface ethernet 0/0
menu robert command 3 shut
menu robert command 4 menu-exit
Hope this helps
Regards
Sakthi
------------- Original Message --------------
"McCallum, Robert" wrote:
To:"'Ccielab' (E-mail)" ,
"Cisco@Groupstudy.
Com (E-mail)"
From:"McCallum, Robert"
Date:Thu, 10 May 2001 10:37:40 +0100
Subject:Menus
Hi,
Does anyone know how to configure a menu such that by pressing key 1 it will
do various commands i.e.
menu robert text 1 Press key 1 to shut ehternet interface down
menu robert command 1 conf t
then when you put in more menu robert command 1 they just overwrite each
other.
What I need to do is
menu robert command 1 config terminal
menu robert command 1 interface ethernet 0/0
menu robert command 1 shut
menu robert command 1 exit
BUT the only command which is showing is the last menu robert command 1
exit.
I have tried to do menu robert command 1 conf t int e0/0 shut exit
but of course it errors as expected saying that there is no more commands
after conf t i.e. when you normally type the command in.
Any help much appreciated.
Robert McCallum
**Please read:http://www.groupstudy.com/list/posting.html
_____________________________________________________
Chat with your friends as soon as they come online. Get Rediff Bol at
http://bol.rediff.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3976&t=3976
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
