Not part of the original thread but just a comment on "all your normal
stuff". We also had thoughts about using Service Provider IOS throughout our
core but were rudely surprised in the lab when we couldn't do bridging.
We have a few cases where we need bridging (RFC 1483 ATM bridging) so those
routers can't run SP.
I can still remember trying to type "bridge-group1" and wondering why I got
"unrecognized command", until I typed the ? and saw that there weren't any
bridge commands........
shucks
Kevin Wigle
----- Original Message -----
From: Brian
To:
Sent: Wednesday, May 09, 2001 10:22 PM
Subject: RE: Central Hub Site with six T1's. [7:3841]
> On Wed, 9 May 2001, Daniel Cotts wrote:
>
> > Your central site also needs LAN interfaces. Any Internet connectivity?
A
> > good bet would be the 3640 with two NM-4T cards assuming that you want
> > external CSU/DSUs. Not sure of the card and port density for built-in
> > CSU/DSU. Add LAN ports as needed.
> > Now if you don't want Smartnet and are into Jurassic networking then
> > consider a used 4500/4700 or a 7000.
>
> I actually find the latest 11.2 images for the 7000 to be quite good.
> Especially the S train (service provider). You can do all your normal
> stuff. Sure no CEF, but just about all else you need.
>
> Brian
>
>
> >
> > > -----Original Message-----
> > > From: SJ [mailto:[EMAIL PROTECTED]]
> > > Sent: Wednesday, May 09, 2001 11:32 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: Central Hub Site with six T1's. [7:3841]
> > >
> > >
> > > Hello,
> > >
> > > I hope everyone is doing well today. Since this is my first time
> > > writing to the Cisco groupstudy I would like to say that I am
> > > glad to be a
> > > member. As each of you I to hope to someday reach CCIE
> > > status. However, as
> > > all of us I have to support myself and my family so work is
> > > always number
> > > one priority. With that being said I have a work related
> > > question. I have
> > > a customer who has 6 remote sites and a central site. Each
> > > remote site will
> > > be tied into the hub (central site) via T1's. Frame relay is
> > > not an option
> > > because all of the sites are within about 15 miles of the
> > > central site I
> > > have chosen as their hub, and their bandwidth needs are such
> > > that a T1 is
> > > feasible. So, now to my question. Which cisco router
> > > supports 6 or more T1
> > > connections. This customer is on a limited budget, as such I will be
> > > deploying cisco 1750's at each remote site, however I want to
> > > tie all of the
> > > remote sites into the central site, so I need a router with enough
> > > interfaces to support 6 or more T1's. My goal is that each
> > > remote site will
> > > have default routes to the central site, and at the central
> > > site I will
> > > create static routes to the remote sites, as there is no need to run a
> > > routing protocol in this configuration. Can anyone give me a
> > > good central
> > > site router (cheap) that supports six or more T1 interfaces.
> > >
> > >
> > >
> > >
> > > Thanks,
> > >
> > >
> > > SJ
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct
> > > and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> -----------------------------------------------
> We have MOVED!! Make note of our new address!!!
>
> I'm buying / selling used CISCO gear!!
> email me for a quote
>
> Brian Feeny,CCDP,CCNP+VAS Scarlett Parria
> [EMAIL PROTECTED] [EMAIL PROTECTED]
> 318-213-4709 318-213-4701
>
> Netjam, LLC http://www.netjam.net
> 333 Texas St. VISA/MC/AMEX/COD
> Suite 1401 30 day warranty
> Shreveport, LA 71101 Cisco Channel Partner
> p: 318-212-0245
> f: 318-212-0246
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4003&t=3841
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
