I also got this answer from CCO. It is connected to a fiber net and I cannot find out what is causing the suspension. I thought it might have been a faulty 100 meg card but I switched them and it still doesnt work. Ah well back to searching cisco.com and the web.. stuart -----Urspr|ngliche Nachricht----- Von: Circusnuts [mailto:[EMAIL PROTECTED]] Gesendet am: Thursday, May 10, 2001 4:07 PM An: [EMAIL PROTECTED] Betreff: Re: Cisco 2820 100 mb port problem [7:3971] I entered your information into the search engine of the CCO & got this on the first hit. http://www-search.cisco.com/pcgi-bin/search/public.pl?q=Suspended-no-linkbea t&num=10&searchselector=0 Answer: Suspended due to the absence of a linkbeat, ring, or ATM network. This is usually because the attached station is disconnected or powered-down. Port automatically returns to enabled state when the condition causing the suspension is removed. Phil ----- Original Message ----- From: Stuart Laubstein To: Sent: Thursday, May 10, 2001 5:58 AM Subject: Cisco 2820 100 mb port problem [7:3971] > I have a catalyst 2820 that I want to add to my lab but the 100 meg ports > (b1-b8 ) do not work. The error I get when looking at port status is > "Suspended-no-linkbeat" Does anyone know if this is a hardware problem or > have I simply missed something? > > thanks > > stuart > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4023&t=3971 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
