you can use the set span command to monitor all fe ports
D'Wayne Saunders
Senior MIS Operator, CCNA
-----Original Message-----
From: Keith Woodworth [mailto:[EMAIL PROTECTED]]
Sent: Saturday, 12 May 2001 9:51
To: [EMAIL PROTECTED]
Subject: Switch port Mirror on a Cat5500 [7:4240]
Want to put a computer on a cat5500 so as to be able to sniff traffic on
all ports.
We have multiple Vlans on this switch. Basically I have a program called
Snort running on a unix box plugged into a faste port on the cat5500.
I want to be able to detect portscans etc over everything that we have on
that switch.
>From what Ive read I can mirror a port on a switched network to be able to
do this. Is this correct?
Thanks,
Keith
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4248&t=4240
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
