These boxes have a great deal of horse power so if you're on a small network,
the light might not flicker much. ;^)
Seriously though, there is no mechanism that I know of to turn it off or on.
It defaults as on.
Darren
At 10:53 PM 05/13/2001 -0400, Brandon wrote:
>I have a Cat 6000. The network load display on the supervisor (engine)
>module
>never registers any usage. How do I turn this on?
>
>Thanks,
>Brandon
>FAQ, list archives, and subscription info:
>http://www.groupstudy.com/list/cisco.html
>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
****************************************************************************
***********************************
Darren S. Crawford
Lucent Technologies Worldwide Services
2377 Gold Meadow Way Phone: (916) 859-5200 x310
Suite 230 Fax: (916) 859-5201
Sacramento, CA 95670 Pager: (800) 467-1467
Email: [EMAIL PROTECTED] Epager: [EMAIL PROTECTED]
http://www.lucent.com Network Systems
Consultant - CCNA, CCIE Written
"Providing the Power Operable Networks."
****************************************************************************
***********************************
"Ham and Eggs - A day's work for a chicken; A lifetime commitment
for a
pig."
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4348&t=4346
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
