R,

Are you using inverse arp or maps statements for your dlci to ip mappings?
If you are using mappings you will need to configure a map statement as the
one to the hub but map it to the local ip of the router. Use caution if on
production network.
For the problem with DHCP try traceroute and see where it dies.
hth
kv

----- Original Message -----
From: "robert alldread" <>
To: 
Sent: Monday, May 14, 2001 11:00 AM
Subject: Frame Relay Problem [7:4435]


> Hey,
>
> I have read through the archives and found information close to what I am
> needing, but not exactly.
>
> Here is the question...
>
> I have (3) 3600 series routers connected by Frame-relay links.  router#1
is
> the main, router#2 and router#3 hang off of the main in a hub and spoke
> config.  I have a DHCP server behind router#1 that all subnets use for
> address's.  I am running EIGRP.
>
> Router#2 and router#3 have "ip helper-address" statements for the DHCP
> server.  Router#2 can ping the DHCP server and its own serial interface
and
> get DHCP addresses, but router#3 can't ping the DHCP server or its own
> serial interface, or get DHCP address's.  Traffic passes fine, LMI is
> correct, and PVC's are setup correctly.  Both Router#2 and Router#3 have
the
> exact same config(beside network numbers, ip address's, and DLCI's).
>
> What would cause a router not to be able to ping it own serial
interface???
> "show ip int s0" says (up,up) and LMI are increasing every 10 seconds..
>
> Please help....cisco TAC can't even solve this one...
>
> I am not a member of groupstudy (yet), so please respond to
> "[EMAIL PROTECTED]"
>
> Thank you guys!!
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4444&t=4435
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to