On Tue, 15 May 2001, Oriya Pollak wrote:
> Can anyone please help configuring a 2621 Router witn a CSU/DSU module to
> make
> me T1 work with is. here is the info I have from my ISP, please help.
FTR, posting the same request from 2 different addresses 1 minute apart
won't get you help any faster, esp. as you're rather vague about what
kind of help you hope to get. I'll assume that you're asking where in
your configuration these (which are common FR configuration commands)
should go. I never laid my grubby paws on that specific router/interface
combo, but something along these lines should get you started:
controller t1 0/1
channel-group 3 0-23
interface serial 0/1:3
> encapsulation frame-relay IETF
> frame-relay lmi-type ansi
interface serial 0/1:3.38 point-to-point
> ip address 216.239.229.77 255.255.255.252
> frame-relay interface-dlci 38
(change parameters as required for your actual configuration)
For more information, look up the commands in the relevant configuration
guide or command reference.
--
"Someone approached me and asked me to teach a javascript course. I was
about to decline, saying that my complete ignorance of the subject made
me unsuitable, then I thought again, that maybe it doesn't, as driving
people away from it is a desirable outcome." --Me
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4579&t=4555
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
