If you made the cable yourself...
Make sure you used the correct pairs (colors) on the correct pins.
Short cables it does not make much difference, longer cables it does.
"[EMAIL PROTECTED]" wrote:
> hi group
>
> my 1st mail to group , joined a month back has helped me alot
> i thank all of you.
>
> i have a doubt please help me to sort it out.
>
> point no. 1
>
> i am working in an ISP, one of our client is conected from our fastethernet
> port to his router over cross cable(total cable length is 60 meter both
> routers r 3600 series). customer is experincing packet loss, someone said
> that for cross cable length cant me more that 15-20 Meter. But i have never
> come across such thing in any book. all books say that for 100Base T length
> is 100M.
>
> point no. 2
>
> we have 2912XL switch, to see ip address/subnet mask/default gateway what
is
> command. in case of 1900 series it is
> sh ip. i tried searching on cisco site but could not locate it.
>
> looking for u alls support
>
> thanks
>
> manoj
>
> ______________________________________________________
> 123India.com - India's Premier Portal
> Get your Free Email Account at http://www.123india.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4589&t=4561
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
