I think you may be missing a : in between the command tftp-server flash
filename. I reckon it should be tftp-server flash:filename.
HTH
-----Original Message-----
From: Kelly D Griffin [mailto:[EMAIL PROTECTED]]
Sent: 22 May 2001 14:58
To: [EMAIL PROTECTED]
Subject: Re: Router as TFTP Server [7:5426]
Current configuration:
!
! Last configuration change at 08:19:12 CDT Tue May 22 2001 by kegrif
! NVRAM config last updated at 08:19:13 CDT Tue May 22 2001 by kegrif
!
version 12.0
service timestamps debug datetime localtime show-timezone
service timestamps log datetime localtime show-timezone
no service password-encryption
!
hostname R1
!
!
username kegrif privilege 15 password 0 xxxxxxx
ip subnet-zero
ip name-server 10.xx.226.225
clock timezone CDT -5
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.0
no ip directed-broadcast
!
interface Ethernet0
ip address 172.25.21.109 255.255.255.0
no ip directed-broadcast
!
interface Serial0
ip address 192.168.255.1 255.255.255.252
no ip directed-broadcast
encapsulation frame-relay
ip ospf interface-retry 0
no ip mroute-cache
frame-relay map ip 192.168.255.2 103
frame-relay lmi-type cisco
!
interface Serial1
no ip address
no ip directed-broadcast
shutdown
!
router eigrp 1
redistribute connected
redistribute static
network 172.25.0.0
network 192.168.255.0
!
ip classless
!
tftp-server flash c2500-d-l.120-9.bin
!
line con 0
transport input none
line aux 0
line vty 0 4
login local
!
ntp clock-period 17179684
ntp source Loopback0
ntp peer 172.25.21.1
end
Kelly D Griffin, CCNA, CCDA
Network Engineer
Kg2 Network Design
877.418.4025
http://www.kg2.com
----- Original Message -----
From: "McCallum, Robert"
To:
Sent: Tuesday, May 22, 2001 8:48 AM
Subject: RE: Router as TFTP Server [7:5426]
> can you show us your config of the router which is setup as the tftp
server?
>
> -----Original Message-----
> From: Kelly D Griffin [mailto:[EMAIL PROTECTED]]
> Sent: 22 May 2001 14:24
> To: [EMAIL PROTECTED]
> Subject: Router as TFTP Server [7:5426]
>
>
> I have configured a 2500 as a tftp server and have it connected via a WAN
> link in my lab to another 2500. I can ping across the circuit in both
> directions, but when I attempt a tftp transfer I get this:
>
> R2#copy tftp flash
> **** NOTICE ****
> Flash load helper v1.0
> This process will accept the copy options and then terminate
> the current system image to use the ROM based image for the copy.
> Routing functionality will not be available during that time.
> If you are logged in via telnet, this connection will terminate.
> Users with console access can see the results of the copy operation.
> ---- ******** ----
> Proceed? [confirm]
>
> System flash directory:
> File Length Name/status
> 1 6418792 igs-j-l.110-13
> [6418856 bytes used, 1969752 available, 8388608 total]
> Address or name of remote host [1.1.1.1]? 1.1.1.1
> Source file name? c2500-d-l.120-9.bin
> Destination file name [c2500-d-l.120-9.bin]?
> Accessing file 'c2500-d-l.120-9.bin' on 1.1.1.1...
> Loading c2500-d-l.120-9.bin from 1.1.1.1 (via Serial0): ! [OK]
>
> Erase flash device before writing? [confirm]
> Flash contains files. Are you sure you want to erase? [confirm]
>
> Copy 'c2500-d-l.120-9.bin' from server
> as 'c2500-d-l.120-9.bin' into Flash WITH erase? [yes/no]yes
>
> %SYS-5-RELOAD: Reload requested
> %FLH: c2500-d-l.120-9.bin from 1.1.1.1 to flash ...
>
> System flash directory:
> File Length Name/status
> 1 6418792 igs-j-l.110-13
> [6418856 bytes used, 1969752 available, 8388608 total]
> Accessing file 'c2500-d-l.120-9.bin' on 1.1.1.1...
> Loading c2500-d-l.120-9.bin ... [timed out]
> [failed]
>
>
> I can ping across the circuit from the tftp server router while the
timeouts
> are occurring. The 1.1.1.1 address is the address of Loopback0 on R1. I
am
> running EIGRP for routing and do not have a default route statement in
> either router.
>
> Any ideas?
>
> Kelly D Griffin, CCNA, CCDA
> Network Engineer
> Kg2 Network Design
> 877.418.4025
> http://www.kg2.com
> ____________________________________________
> http://1cis.com
> Free E-mail Servers with unlimited mailboxes
> 1st Class Internet Solutions
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> ____________________________________________
> http://1cis.com
> Free E-mail Servers with unlimited mailboxes
> 1st Class Internet Solutions
____________________________________________
http://1cis.com
Free E-mail Servers with unlimited mailboxes
1st Class Internet Solutions
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5435&t=5426
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
