Can I see the config of the PRIs and your dial peers? It could be a problem with the peer and not the PRI, what version of IOS are you using for VoIP Regardas ""Chan"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi All > > I havea problem when AS 5300 for voip in Japan. I'm using a ISDN PRI > line for the AS5300. I have configure the switch type as primary-ntt > (information as given by the telco). after configure the AS5300 i can > originate call to other AS 5300 in oversea.But my AS5300 in oversea > can't terminate call into Japan AS 5300. > > I do an debug isdn q931 > > i got this message : invalid element content > > > Later i change the switch type to primary-net 5, is there other way > round. It can terminate call into Japan but cannot originate call(engage > tone). > > Hope that someone can help me resolve this problem. > > > Thank you > Chan > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=5441&t=5441 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
