There are two similar configurations that we are
trying to get running that include the Cisco router.
DS3 4xT1 IMA
DS3
Frame --------->BSTDX --------> CBX- -------------->
SA 600 --------------------> Cisco 7204
------------->
Relay 9000 500
This is pretty close to a customer config that is
having IMA problems. The IMA links are going in and
out of service when Frame Relay traffic is being
passed.
To try and get the 7204 router up and passing data, I
tried to get the following config running.
Ethernet 4Xt1 IMA
DS3 Ethernet
SmartBits ------------> SA 1200 ----------------->
Cisco 7204 ------------> SA 1200 ----------------->.
SmartBits
The problem I had with this config is that I
configured Bridge Groups and tunnels thru the SA 1200
and I was told that the Cisco was looking for routed
PDU's. I changed the config in the SA 1200's to
routed interfaces and then the IP addresses required
did not seem to be what the customer config would be
using. Does anyone think that it might be IP scheme
that is playing a havoc here.
Do you have any Cisco documentation that might be
better than what is on their web site? Please let me
know.
Rajeev
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5459&t=5459
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
