Do you have any active (up/up) interfaces with an IP address assigned?
Try creating a loopback interface, assign it an IP, and then re-try...
HTH,
Charles
""Brian Lodwick"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Well that is not the error message I got, mine said:
> OSPF: Could not allocate router id
> Which I would say is the reason the router had already allocated process
ID
> 1 for:
> CPU utilization for five seconds: 2%/2%; one minute: 2%; five minutes: 0%
> PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
> 1 4 10 400 0.00% 0.00% 0.00% 0 Load Meter
>
> Why not just pick another process ID? this is only significant to the
local
> router.
>
> >>>Brian
>
>
> >From: "Mechbal, Hind (MED-DEVOTEAM)"
> >Reply-To: "Mechbal, Hind (MED-DEVOTEAM)"
> >To: [EMAIL PROTECTED]
> >Subject: OSPF process ID [7:5436]
> >Date: Tue, 22 May 2001 10:24:11 -0400
> >
> >I tried to enable ospf on a router by given the process ID 1:
> >router ospf 1
> >I obtain the error :
> >Unknown routing protocol
> >
> >the IOS version that I am usig is : 11.1
> >
> >does any body know why ?
> >Thanks
> >FAQ, list archives, and subscription info:
> >http://www.groupstudy.com/list/cisco.html
> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5461&t=5436
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
