Hi I have 3600 router coonfigured as x25 ....i have 2 slots each having 4 serial interfaces in it ... i have to configure this with 2 serial ports on slot one for x25 encapsulation and on slot 2 i have to configure 2 serial ports which need to act as redundant in case there is problem with slot 1 ports .......... i have ver 11.3 runing on it ........ i added the entries like ....... x25 route 010104 int ser 1/2 x25 route 010104 int ser 1/3 x25 route 010103 int ser 2/2 x25 route 010103 int ser 2/3 First thing will this do the job the machines on the other end has 2 serial port for each machine one is active and one is standy .....machine switch over to standy if it sees error i link so i need to route the packets to this standby machine with interface ser 2/2 and ser 2/3 . Now i read somewhere like x25 retry command and backup interface command ... how can i use them can anybody send me the configuration and also will this work on ver 11.3 i tried it on ver11.3 but i think it doesn';t support it ........ Pls suggest something ............. Regards Arun Sharma Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=6087&t=6087 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
