i don't find these commands on the my router i am using ver 11.3 ....
both are not here ....or may be i don't know how to run them
Arun Sharma
""Rahul Kachalia"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Well not sure about the stat but since its an event not an specific error
I
> would try following :
>
> - Though there is an OIR event configure same port & put it online, verify
> X25 works. Even if it works make sure you dont have any errors on link.
> - Try changing cable/PA/bay on same box.
> - If you another router running same image then use same cable/pa to make
> sure if you get same error.
>
> If that works then change logging level, also make sure you dont have
> any records by typing following commands if its there then add more
> information to mail.
>
> - show exception
> - show align
>
> thanks,
> rahul.
>
> ----- Original Message -----
> From: "Arun"
> To:
> Sent: Saturday, May 26, 2001 10:06 PM
> Subject: Re: help --------------Pls ................OIR Error [7:6021]
>
>
> > Hi
> > Here the detail for u i have ver 11.8 runnign on it
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) 3600 Software (C3640-JS-M), Version 11.3(8), RELEASE SOFTWARE
> (fc1)
> > Copyright (c) 1986-1999 by cisco Systems, Inc.
> > Compiled Tue 02-Feb-99 14:13 by dschwart
> > Image text-base: 0x60008918, data-base: 0x608E8000
> >
> > ROM: System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
> > SOFTWARE (f
> > c1)
> > System image file is "flash:c3640-js-mz.113-8", booted via flash
> >
> > cisco 3640 (R4700) processor (revision 0x00) with 49152K/16384K bytes of
> > memory.
> > Processor board ID 13831748
> > R4700 processor, Implementation 33, Revision 1.0
> > Bridging software.
> >
> >
> > Regards
> > Arun Sharma
> >
> > ""Chuck Larrieu"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Beat the hell out of me.
> > >
> > > In the past I have posted about problems with earlier 12.x codes,
where
> if
> > I
> > > plugged serial cables into a serial interface while the router was
> powered
> > > on, IP would not work, although IPX would.
> > >
> > > I've had people tell me I was an idiot, and this couldn't happen. But
> > Pamela
> > > Forsythe told me she recognized the phenomenon.
> > >
> > > I've moved my routers onto various versions of 12.1 code, and have not
> > seen
> > > the problem. Actually, I don't think I ever saw the problem with later
> > > versions of 12.0 code either.
> > >
> > > Still curious what IOS version you are running.
> > >
> > > Chuck
> > >
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of
> > Arun
> > > Sent: Saturday, May 26, 2001 8:02 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: help --------------Pls ................OIR Error [7:6021]
> > >
> > > hi
> > > yes i tried reloading the router with the cables attached and it
worked
> > > ......
> > > thanks for the help but what could be the reason for that if i know it
> > will
> > > be a help .....
> > >
> > > Arun Sharma
> > > ""Chuck Larrieu"" wrote in message
> > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > > Have you tried reloading the router with the cable attached?
> > > >
> > > > Or blowing away the X.35 config, reloading with the cable attached,
> then
> > > > putting in the X.25
> > > >
> > > > What version of IOS are you running? I have documented a couple of
> > > problems
> > > > revolving around serial port cables with 12.0.4 or so.
> > > >
> > > > Chuck
> > > >
> > > > -----Original Message-----
> > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
> Of
> > > Arun
> > > > Sent: Saturday, May 26, 2001 3:58 AM
> > > > To: [EMAIL PROTECTED]
> > > > Subject: help --------------Pls ................OIR Error [7:6021]
> > > >
> > > > Hi
> > > > I have router configured as X25 router .I have 2 slots in it with
each
> > > > having 4 serial ports on them.The problem is that when i connect the
> > cisco
> > > > provided cable just the cable to the administratively shutdown
serial
> > port
> > > > it gives me error :
> > > > %OIRINT:OIR Event has occured OIR_ctrl 50 oir stat 8F88
> > > > ( i have checked OIR it stands online insertion and removal but i
> could
> > > not
> > > > find this particular error)
> > > > and this also hangs the router i have checked the cable i can not do
> > many
> > > > thngs on the router as it is in live n/w ..Please help ..the router
> > works
> > > > well after i remove cable and restart the router .
> > > > Any help will be appreciated
> > > >
> > > >
> > > > Regards
> > > > Arun Sharma
> > > > FAQ, list archives, and subscription info:
> > > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6092&t=6021
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
