type-code 16-bit hexadecimal number written with a leading "0x"; for
example, 0x6000. You can specify either an Ethernet type code for
Ethernet-encapsulated packets, or a DSAP/SSAP pair for 802.3 or
802.5-encapsulated packets. Ethernet type codes are listed in the appendix
"Ethernet Type Codes."
http://www.cisco.com/univercd/cc/td/doc/product/software/ios112/112cg_cr/8rb
ook/8rtypeco.htm
wild-mask 16-bit hexadecimal number whose ones bits correspond to bits in
the type-code argument that should be ignored when making a comparison. (A
mask for a DSAP/SSAP pair should always be at least 0x0101. This is because
these two bits are used for purposes other than identifying the SAP codes.)
Examples
The following example permits only LAT frames (type 0x6004) and filters out
all other frame types:
access-list 201 permit 0x6004 0x0000
The following example filters out only type codes assigned to Digital
(0x6000 to 0x600F) and lets all other types pass:
access-list 202 deny 0x6000 0x600F
access-list 202 permit 0x0000 0xFFFF
Use the last item of an access list to specify a default action; for
example, permit everything else or deny everything else. If nothing else in
the access list matches, the default action is normally to deny access; that
is, filter out all other type codes.
""Manoj Sekhar"" Hi all,
>
> I have client want to connect two Branch offices using DDR and
> access a netbios based program form one branch to the server
> on the other branch. They got one 801 and 803 with ip only IOS.
> The DDR is configured with IP and the routers are getting
> connected over ISDN. Now the netbios program is the problem.
>
> I thought of two options a) use IP tunnel and b) Transperant Bridging.
> I was looking in the Cisco Cd for the info and got the explanation
> and sample config on transperant bridging. But one point of defining
> interesting traffic I couldn't grasp. The info from the CD is as given
> below
>
> access list access-list-no {permit|deny}type-code[mask]
> (Permits packets according to ethernet type code)
>
> The corresponding line in sample config was
>
> access-list permit 0x0800 0xFFF8
>
> Can anyone please explain type-code and mask in the command
> and the values in the sample config.
>
> Hope the background info doesn't bother you.
>
> Thanks in advance
>
> Manoj
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6214&t=6206
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
