If your routers are connected serially, lower the clockrate on the DCE
interface to the desired speed. If you want to introduce variable
latency, I'd have to think about it for a bit. A simple way would be to
do FTP transfers or large extended pings from time to time to simulate
traffic. There's probably a more automatic way to do it but my brain
hasn't quite engaged today.
HTH,
John
>>> "[EMAIL PROTECTED]" 5/30/01 9:31:11 AM >>>
Hi,
I'm looking for ideas to induce latency in a lab scenario.
More specifically to simulate latency between nodes in Seattle,
Los Angeles, and Baltimore. Any help would be appreciated.
Thanks,
Francis
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6474&t=6453
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
