I'm working through Slatterly and Hutchnik's Lab Practice Kit and I'm stuck
on the very last portion of their OSPF lab. In this portion of the lab
they have OSPF redistributing into IGRP. On the router with OSPF and IGRP,
the IGRP interface has an IP address with a 24 bit mask. Because of this,
the OSPF networks being redistributed into IGRP need to have 24 bit masks.
The book's recommendation was to add a "summary-address" command to the
OSPF process to set the OSPF networks being redistributed into IGRP to a 24
bit subnet mask. This would be affecting the redistribution from OSPF into
IGRP. My understanding was that the "summary-address" command was to
affect networks being redistributed into OSPF.
Also, adding the "summary-address" command doesn't work for me, although
using the "area range" command on an ABR does allow the routes to be
successfully redistributed into IGRP. Can someone tell me if the
"summary-address" command is supposed to work in this scenario and if there
are any gotchas in getting it working.
Thanks,
Rob
----------------------------------------------------------------
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6487&t=6487
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
