Voice interface cards can only be used
in voice network modules (NM-1V and NM-2V)
regards,
Orest
Sergey Konovalov schrieb:
> WIC2T + Serial WIC + Voice 2V
>
> Problem: Router cannot see its interfaces (hardware)
> show interfaces - received none
> show version - received none in hardware section
> After router booted we received:
>
> 00:00:04: %PA-2-UNDEFPA: Undefined Port Adaptor type 0
> in bay 0
> 00:00:04: %PA-2-UNDEFPA: Undefined Port Adaptor type
> 101 in bay 1
> 00:00:04: %LINK-4-NOMAC: A random default MAC address
> of 0000.0c84.1a51 has
> been chosen. Ensure that this address is unique, or
> specify MAC
> addresses for commands (such as 'novell routing')
> that allow the
> use of this address as a default.
>
> Please, help us with this problem.
>
> _______________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.ca address at http://mail.yahoo.ca
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6576&t=6251
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
