Thanks a lot. It worked. I can now ping and telnet into 5505.
Appreciate your help.
Alex
Mike Bernhardt wrote:
> Are you trying to manage the 2924 from the new VLAN? If so, you have to
shut
> down VLAN 1. then you can no-shut the new VLAN.
>
> ..........................................
> Mike Bernhardt
> CCIE #6079
>
> To reply directly, yo know what to do...
>
> khramov wrote:
> >
> > Trying to set up a VLAN between 5505 with the RSM module and
> > 2924 Cisco
> > Catalyst Switch over 100baseFX. Everything seems to be working
>
> > correctly except the VLAN on the 2924 shows shut down and can
> > not be
> > brought up.
>
> > On 5505 we created VLAN, assign an IP address to the VLAN on
> > 5505 and on
> > the VLAN 2924. We left the VLAN 1 on the 2924 with no IP
> > address.
> > We also enabled EIGRP routing on RSM module on 5505.
>
> > Any suggestions on what we need to do to make them talk over
> > the VLAN.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6602&t=6475
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
