It depends. If your ISP is routing to you, then you need an ip address. If
they are bridging, you probably should do it another way. I've used a
virtual bridge interface in these situations, and put the ip address on the
BVI.
HTH
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Leo
Shen
Sent: Thursday, May 31, 2001 12:32 AM
To: [EMAIL PROTECTED]
Subject: about the config of adsl in 2621 [7:6578]
the guide of cisco say:
intface atm0/0
no ip address
can the atm interface have ip address?
thanx
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6604&t=6578
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
