Hi everyone,I plug my US robotics sportster into the AUX of the Cisco router 2610 to access the routerin case everything else fails. It works perfectly when I dial the router from my laptop. Now,I would like to implement call-back procedure. I would like to be able to dial into the AUXport of the router, authenticate by typing in my username and password, then the router willdisconnect, then call me back on my phone number. I haven't been able to get it working.There is this CCIE at work who help me troubleshoot with this but it is not working. Someone on this group points me to the sample on Cisco website but the sample configurationis NOT correct. In fact, it is wrong. I would like to obtain a working configuration form someone in this group who actually has it working. Here is my configuration: service exec-callback username remote nocallback-verify callback-dialstring 7036377000 password 7 082245 chat-script offhook "" "ATH1" OK chat-script rtp ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 45 CONNECT \c call rsvp-syncline aux 0 login local exec-timeout 30 0 script modem-off-hook offhook script callback rtp modem InOut modem autoconfigure type usr_sportster transport input all callback forced-wait 5 stopbits 1 speed 115200 flowcontrol hardware Thanks.Kevin ------------------------------------------------------------------------ Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7652&t=7652 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
