Hi Cheeyong,
HSRP indeed won't do the trick, this is a redundancy mechanism.
To enable load-sharing, check what routing protocol you are running. OSPF
and EIGRP are able to do equal-cost load-sharing by default. If the 2 serial
links are unequal cost, I'd recommend EIGRP to provision unequal-cost
load-sharing.
Your network diagram unfortunately isn't too clear. From which network to
which network do you want to load-balance?
I hope this helps for now, let me know if I can further help you out.
Regards,
Remmert
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7692&t=7687
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
